Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp 303 Firecrest Carbon Disc Brake Rear Wheel (Clincher)
$1,300.00
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.
Bontrager Rhythm Elite TLR 26 Front Wheel
$149.99 $479.99 69% Savings
Upgrade your mountain bike for a better ride and lighter weight with Bontrager's Rhythm Elite TLR 26 Wheels. These tubeless-ready hoops feature tough, 6061-aluminum rims, sealed-bearing hubs, stainless-steel spokes and locking aluminum nipples to strike the perfect balance of burliness, lightness, and ride quality. And, the wide 28mm rims provide you with a stable platform for running fat, grippy all-mountain knobbies and the axle is convertible between a quick-release and 15mm through axle.
Bontrager XXX TLR Disc 26 MTB Wheel
$299.99 $769.99 61% Savings
Flat-out speed. Crazy-tight cornering. Serious cross country racing demands the unparalleled proficiency of the race day XXX TLR 26 wheelset. These Tubeless Ready wheels feature silky smooth DT Swiss internal hubs and ultra-quick Rapid Drive engagement. Key features: - Rapid Drive hub design instantly transfers effort into forward momentum - Stacked lacing alignment provides a better spoke bracing angle for a stiffer wheel - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Offset spoke bed reduces wheel dish for stiff and stable performance - Lightweight alloy rim (24mm outer, 21mm inner width) with DT Swiss hubs - Center Lock QR15 front hub, 135/142 QR rear hub - Includes Tubeless Ready (TLR) rim strip, TLR valve, interchangeable axle parts, and lock ring - 86kg (190lb) rider weight limit
Bontrager Aeolus Pro 3 TLR Disc
$529.99 - $669.99
There has never been a better time to upgrade to the feel and performance of carbon wheels. Aeolus Pro 3 TLR is a full carbon, tubeless-ready rim brake road wheel that balances durability, weight, and aerodynamics for pro-level performance that doesn’t break the bank. Bontrager started with a proven 35mm-depth shape and added the versatility of disc brake hubs to make a carbon road wheel available to all. Key features - D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge - OCLV Pro carbon offers an optimized blend of weight, stiffness, and durability - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Stacked lacing alignment provides a better spoke bracing angle for a stiffer wheel - 35mm depth OCLV Carbon rim (27mm outer, 19.5mm inner width) DT Aerolite spokes and Alpina locking nipples - Center lock disc hubs with 12mm thru-axle front and rear, Bontrager 24 point engagement, 3 pawl hub - Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs, axle swap kit available for quick release and 15mm - Includes TLR rim strip, TLR valve, valve core removal tool, and traditional rim strip
Race Face Next R 27.5-inch Front Wheel
$724.99
Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
DT Swiss BR 2250 Classic
$434.00 - $605.00
Big tires and wide rims normally mean heavy wheels. But not with DT's BR 2250s! Nearly as light as standard wheels and with the footprint only fatties can offer, this wheelset turns any fat bike into a fun-machine!
Bontrager Line + TLR Boost Wheel
$374.99
Go wider while maintaining the downhill speed you crave. The Line Plus TLR 29-inch wheel's width provides unmatched traction and stability in the corners. The Tubeless Ready rim allows for a stress-free day enjoying the great outdoors. - Rapid Drive hub design instantly transfers effort into forward momentum - Boost models hub width (148r/110fr) and stacked lacing increase stiffness - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Offset spoke bed reduces wheel dish for stiff and stable performance - Interchangeable axles allow for compatibility with more frames and forks - Lightweight alloy rim (44mm outer, 39mm inner width) and 54 tooth Rapid Drive hubs - 6 bolt 110x15 front hub, 148x12 rear hub - Includes Tubeless Ready (TLR) rim strip, TLR valve, interchangeable axle parts
Crank Brothers Cobalt 1 Wheelset (27.5-inch)
$399.00
For more speed in the dirt, throw on a set of Crank Brothers' Cobalt 1 27.5-inch wheels. These lightweight wonders boast tubeless-compatible aluminum rims that keep the weight down to 1,900 grams for the set and they boast machined aluminum hubs with sealed bearings that feel like they'll spin forever. Crank Brothers Twin Spoke technology provides superior strength and stiffness with only 24 spokes per wheel.
Shimano Deore XT WH-M8020 Trail Wheels (29-inch)
$253.99 - $537.99
• Model Number : WH-M8020 • Series : DEORE XT • Brake Type : Center Lock Disc • Axle Type : 15mm E-Thru • Over Locknut : 100mm • Axle Length : 100mm • Rim Type : Offset rim • Rim Height : 18.8mm • Rim Width : 27.9mm • Recommended Tire : 29x2.00-2.35 • Increased tire rigidity for improved traction. • 24C wide-profile offset rim. • Front/ Rear: E-thru. • 28pc butted spokes (F&R). • Offset rim design for durable wheel construction.
Zipp 404 Firecrest Tubular Disc Brake Wheel
$1,300.00
Road bikes are ever evolving and ever inspiring. The Zipp 404 Firecrest Tubular Disc-brake wheelset offers cyclists everywhere the opportunity to experience superior braking and stopping power to match the speed and stability of their most popular and versatile 58mm rim depth. Aero has never been so affordable and attainable. Zipp’s 404 Firecrest Tubular Disc brake is all about road riding and racing. In use at the highest levels of professional peloton, disc brakes are poised for growth in road riding and racing and triathlon. The consistency and power of disc brakes provides precision modulation and stopping power, literally at your fingertips. As for speed, the 404 Firecrest is where the Firecrest Revolution began. If you had to choose just one wheel, the 404 Firecrest should be your choice. With a depth and shape proven in all conditions, it’s a classic all-around performer and the standard by which all other wheels are measured. Its 58mm rim depth is a classic all-around performer that has carried athletes to victory in every kind of event and situation. All of that, combined with the performance of disc braking, make the 404 Firecrest Tubular Disc brake an ideal choice for today’s style of road riding and gran fondos with long descents, super-technical courses and varied road surfaces. Zipp’s expansion of its lineup of disc-brake wheelsets is at the forefront of a technical renaissance of road cycling. Zipp initially developed its disc-brake wheelsets at more shallow rim depths with the 303 and then 202 Firecrest Disc-brake for use in cyclocross, gravel and mixed-surface road riding. Now, the era of road disc-braking has arrived. Firecrest technology, with rims that maintain a near-constant width almost all the way to the spoke bed, is the first aero profile that effectively controls airflow around the back half of the wheel. Firecrest wheels offer stable, predictable handling at every wind angle by moving the center of pressure—what they call aero balance—the focal point of side forces on the rim—to its optimal location near the steering axis. A wider rim built using a proprietary resin system and manufacturing process, increases lateral stiffness for sprinting and cornering yet offers greater vertical compliance for more control, comfort, and durability on rough surfaces. At the center of the 404 Firecrest Tubular Disc-brake is the durable and versatile 77/177D hubset, which offers options for riders to switch wheels from quick-release to thru-axle without tools. The XDR Driver body option allows for expanded cassette ranges including a 10-42. About the 77/177D hubset: - Bearing preload precision set—that means no pre-load adjustment is needed. - Improved bearing protection and sealant. - Includes Zipp Tangente quick-release skewers with a wider more ergonomic handle to provide more leverage for opening and closing. When closed, the lever contours neatly with the frame. - Thru-axle compatible. Comes with thru-axle end caps that can be swapped by hand: - Front: 12x100mm & 15x100mm - Rear: 12x135mm & 12x142mm - Proprietary flange geometry and spoke hole attachment pattern with Sapim CX-Ray spokes to optimize torsional and lateral stiffness without sacrificing weight or robustness. The 404 Firecrest Tubular Disc brake comes with a standard 10/11 speed driver body for SRAM/Shimano or for Campagnolo, allowing you to run a wide range of cassettes. For those looking for a wider gear range, or tackling especially extreme terrain, a SRAM XDR driver body for 177D (sold separately) is easily installed to allow for more cassette options. A 1.85mm spacer is included with the XD driver body and is required for use on the 177D hub. XDR driver body compatible with 11-speed cassettes only. - Each wheel includes 2 sets of Zipp thru-axle end caps, 1 Zipp Tangente quick release, 1 Zipp rim tape 700c x 20mm and 1 Zipp core valve extension per wheel.
No Image
$550.00
Enthusiast-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, flat black anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0 straight gauge - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 27.5-inch, 1845g per set - E-bike compatible: trail/AM e-bikes up to 350 watts max
No Image
$550.00
Enthusiast-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, flat black anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0 straight gauge - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1910g per set - Weight: 27.5-inch, 1845g per set - E-bike compatible: trail/am e-bikes up to 350 watts max
No Image
$550.00
Enthusiast-level aluminum wheels for XC/trail Massively different - Simple and beautiful, unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black anodizing - Rim width: 21mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0/1.6/2.0 - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: cobalt, 6061-t6 - Front hub bearing: sealed cartridge 6804 (x2) - Front hub end caps: 15mm (installed), 9mm (included) - Rear hub material: cobalt, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1790g per set - E-bike compatible: urban/XC e-bikes up to 350 watts max
Race Face Turbine 27.5-inch Rear Wheel
$499.99
Being a company of mountain bikers, when Race Face set out to design a new wheel the goal was simple: make the wheel they want to ride. R is for rally. HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos
Race Face Next R 27.5-inch Rear Wheel
$774.99
Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Race Face Next R 29-inch Rear Wheel
$774.99
Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Zipp 808 Firecrest Carbon Clincher
$1,300.00
Zipp optimized its Firecrest technology to build a highly aerodynamic 82mm rim—the 808 Firecrest Carbon Clincher. Designed for efficient power transfer and stable control in time trial and triathlon competition, the 808's wide 27.5mm rim shape provides confident tracking in crosswinds and over rough surfaces. Built with Zipp's excellent 77/177 hubset that features optimized flange geometry and Sapim CX-Sprint spokes to increase lateral stiffness, this 1,1885-gram wheelset combines toughness and reliability in a wind-shedding package that has to be ridden to fully appreciate. Each wheel includes specially-designed Tangente Platinum Pro Evo brake pads, Zipp Integrated Valve Extender with valve-core wrench, rim tape, and quick release.
Stan's NoTubes Arch S1
$278.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Strider Aluminum Wheelset w/Tires & Tubes
$59.99
Kids wearing out their Strider? That's a good thing! Upgrade their out-of-doors adventures with these aluminum wheels. These lightweight 12-inch wheels are a great upgrade for trail riding and come with tires and tubes.
Zipp 202 Firecrest Carbon Disc Brake Rear Wheel (Clincher)
$1,300.00
Enjoy flat-land speed and rocket up mountains, too, with Zipp’s 202 Firecrest Carbon Disc Brake wheels. Not only do these light wheels set a high climbing standard, they also excel over rough roads and handle like champs in stiff crosswinds. The slippery profiles of Zipp's 32mm-deep, 25.4mm-wide dimpled rims are more aerodynamic than even many deep-section wheels. Zipp's 77D/177D disc hubs give you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. Plus, they're super smooth thanks to precision bearings. And, the finishing touch is Sapim's outstanding CX-Ray spokes.
Zipp 303 Firecrest Carbon Disc Brake Front Wheel (Tubular)
$1,100.00
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between the rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at a lower pressure, which boosts ride quality and comfort and reduces rolling resistance. Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's outstanding CX-Ray spokes.
Zipp 30 Course Disc Brake Rear Wheel (Clincher)
$555.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more and minimize pinch flats.
Zipp 30 Course Disc Brake Front Wheel (Clincher)
$445.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more and minimize pinch flats.
Shimano Deore XT WH-M8000 Race Wheels (29-inch)
$253.99 - $537.99
• Model Number : WH-M8000 • Series : DEORE XT • Brake Type : Disc Brake • Axle Type : QR • Over Locknut : 100mm • Axle Length : 108mm • QR Skewer Length : QR skewer lenght: 133mm • Rim Type : Offset rim • Rim Height : 18.8mm • Rim Width : 23.9mm • Recommended Tire : 29x1.90-2.25 • Faster acceleration and smoother rotation • High rigidity and durability. • 28pc butted spokes (F&R). • Offset rim design with better spoke tension balance for durable wheel construction.
Shimano Deore XT WH-M8000 Race Wheels (27.5-inch)
$253.99 - $537.99
• Model Number : WH-M8000 • Series : DEORE XT • Brake Type : Center Lock Disc • Axle Type : QR • Over Locknut : 100mm • Axle Length : 108mm • QR Skewer Length : QR skewer length: 133mm • Rim Type : Offset rim • Rim Height : 18.8mm • Rim Width : 23.9mm • Recommended Tire : 27.5x1.90-2.25 • Faster acceleration and smoother rotation. • High rigidity and durability. • 28pc butted spokes (F&R). • Offset rim design with better spoke tension balance for durable wheel construction.
Shimano Deore XT WH-M8020 Trail Wheels (27.5-inch)
$253.99 - $537.99
• Model Number : WH-M8020 • Series : DEORE XT • Brake Type : Center Lock Disc • Axle Type : 15mm E-Thru • Over Locknut : 100mm • Axle Length : 100mm • Rim Type : Offset rim • Rim Height : 18.8mm • Rim Width : 27.9mm • Recommended Tire : 27.5x2.00-2.40 • Increased tire rigidity for improved traction. • 24C wide-profile offset rim. • Front/ Rear: E-thru. • 28pc butted spokes (F&R). • Offset rim design for durable wheel construction.
Gusset Black Dog 20
$75.95 - $79.95
- Gusset's bestselling BMX, dirt jump and street use wheels - Black Dog 32mm 6061 alloy double wall rims with loose-ball alloy hubs, black spokes - Flip/flop freewheel threaded rear - Heat treated CrMo axle with room for pegs
Sun Ringle Mulefut 50SL Wheelset
$209.99 - $289.99
A new method of attacking the trail is on the horizon and about to take the mountain bike community by storm. PLUS SIZED 3.0 tires provide faster acceleration combined with increased tire patch for superior traction and added cushion. Introducing the SUNringlé Mulefüt 50! PRODUCT SPECS: - STR SUNringle Tubeless Ready - 50mm rim width - Premium cartridge bearing straight pull hubs - Quick release front axle 100x15 and 110x15 - Rear axle options: 142x12, 148x12 - Wheelsmith straight pull double butted spokes - Wheelsmith brass nipples - 32 hole count - Weight / Set: 2220g (27.5") 2310g (29")
Vittoria Alusion Wheelset
$499.99
Vittoria's Alusion wheelset features a wide-section rim profile to make full use of the grip and handling characteristics of today's road tires. It delivers the durability you need in a training wheelset that keeps weight down, so you can practice like you play. Straight-pull spokes drop weight and increase the Alusion's reliability, while the asymmetrical rear wheel design balances spoke tension for a stronger build. All this adds up to a versatile, long-lasting wheelset you can rely on daily.
Zipp 202 Tubular
$1,150.00
With crisp acceleration and precise handling, Zipp's 202 Tubular is built to crush climbs and carve through crosswinds with efficiency. At only 1,180 grams, the 202 is responsive without sacrificing stability, thanks to optimized hub flange geometry and Sapim CX-Ray spokes. An aerodynamic 32mm toroidal rim profile rolls as well as deeper rims, and Zipp's 77/177 hubset provide hassle-free reliability. Each wheel comes with Tangente Platinum Pro Evo brake pads, a Zipp Integrated Valve Extender with valve-core wrench, and quick release.
Page 1 of 11 Next page